Cleaning and care
55
Checking the heat exchanger unit
Danger of injury! Do not touch
the cooling fins with your hands. You
could cut yourself.
Look to see if lint has accumulated.
If there is visible soiling:
Use a vacuum cleaner with a
dusting brush attached to clean the
cooling fins. Only pass the vacuum
cleaner brush over them lightly,
without applying any pressure. Take
care not to bend the cooling fins out
of shape or to damage them.
Carefully vacuum up any visible lint or
dirt.
Replacing the plinth filter
Fit the filter back on the handle. Make
sure it is the correct way round.
To ensure that the filter is positioned
correctly in the front of the heat
exchanger unit:
First insert the handle with the plinth
filter attached over the two guide
pins:
– The word Miele on the handle must
be the correct way up.
Push the plinth filter in completely.
The act of pushing in the plinth filter will
also push in the right-hand guide pin.
Close the heat exchanger flap.
