Miele TWI 180 WP Operating Instructions Manual Download Page 20

Page: 20 / 96

Initial set-up

Downtime after installation



After installation, downtime of 1

hour is required before connecting
the tumble dryer to the electricity
supply.
Otherwise, the heat pump could be
damaged.

Removing the protective foil
and stickers



Remove:

– The protective foil from the door

– Any stickers from the front and the lid



Please do not remove any labels

(e.g., the data plate) which are visible
when you open the door.

Switching on the tumble dryer



Turn the program selector to the

Cottons

program.

The welcome tone will sound and the
welcome screen will light up.

Setting the language

You are requested to set the display
language. It is possible to change the
language at any time by setting the
program selector to the

More programs/



position in the

Settings 

sub-menu.









english (USA)



Touch the



sensor button until the

language you want appears in the
display.



Confirm your selection of the
language by touching the

button.

Summary of Contents for TWI 180 WP

































































































Search results

Summary of Contents for TWI 180 WP

Reviews:

Related manuals for TWI 180 WP

Brands by name

Popular brands

Miele TWI 180 WP, Operating Instructions Manual

Search results

Summary of Contents for TWI 180 WP

Reviews:

Related manuals for TWI 180 WP

Brands by name

Popular brands