Miele TWF 720 WP Operating Instructions Manual Download Page 31

Page: 31 / 80

Programme chart

Woollens handcare

Max. load 2.0 kg*

Items

Woollen garments and fabric containing wool blends, e.g. pullovers,
cardigans, stockings.

Notes

- Wool and wool blend items are only fluffed up; they are not dried

completely.

- Remove garments as soon as the programme has finished.

Shirts

Max. load 2 kg*

Normal, Hand iron

Items

Shirts and blouses.

Express

Max. load 4 kg*

Extra dry, Normal, Hand iron, Machine iron

Items

Hard-wearing garments suitable for the

Cottons

programme.

Notes

The programme duration is shorter.

Denim

Max. load 3 kg*

Normal, Hand iron

Items

Denim garments, e.g. jackets, jeans, shirts, and skirts.

Bed linen

Max. load 4 kg*

Extra dry, Normal, Hand iron, Machine iron

Items

Bed linen, pillow cases.

Proofing

Max. load 2.5 kg*

Items

Microfibre fabric, skiwear, outerwear, fine close weave cotton
garments (poplin), or tablecloths which are suitable for drying in a
tumble dryer and have been treated to provide a water and dirt-
resistant finish.

Notes

- Items are dried to a

Normal

level only.

- This programme includes a proofing fixing phase.

- Only use proofing agents which are stated by the manufacturer as

being “suitable for use on membrane textiles”. These agents
contain fluorochemical compounds.

- Do not dry items which have been treated with proofing agents

containing paraffin. Fire hazard!

Summary of Contents for TWF 720 WP

















































































Search results

Summary of Contents for TWF 720 WP

Reviews:

Related manuals for TWF 720 WP

Brands by name

Popular brands

Miele TWF 720 WP, Operating Instructions Manual

Search results

Summary of Contents for TWF 720 WP

Reviews:

Related manuals for TWF 720 WP

Brands by name

Popular brands