Miele TKR 450 WP Operating Instructions Manual Download Page 39

Page: 39 / 88

Programme chart

Minimum iron

Max. load 4.0 kg*

Normal plus, Normal, Slightly dry, Hand iron



, Hand iron



Use for

Minimum iron items made of cotton, synthetic or mixed fibre, e.g.:

workwear, tunics, tops, dresses, trousers, table linen and socks.

Woollens handcare

Max. load 2.0 kg*

Use for

Woollen garments and fabric containing wool blends, e.g. pullovers,

jackets and socks.

Note

– Wool and wool blend items are only fluffed up; they are not dried

completely.

– Remove garments as soon as the programme has finished.

Denim

Max. load 3.0 kg*

Normal plus, Normal, Slightly dry, Hand iron



, Hand iron



Use for

Denim garments, e.g. jeans, jackets, skirts, shirts

Shirts

Max. load 2.0 kg*

Normal plus, Normal, Slightly dry, Hand iron



, Hand iron



Use for

Shirts and blouses.

* Weight of dry laundry

Summary of Contents for TKR 450 WP

























































































Search results

Summary of Contents for TKR 450 WP

Reviews:

Related manuals for TKR 450 WP

Brands by name

Popular brands

Miele TKR 450 WP, Operating Instructions Manual

Search results

Summary of Contents for TKR 450 WP

Reviews:

Related manuals for TKR 450 WP

Brands by name

Popular brands