Miele TKR 350 WP Operating Instructions Manual Download Page 20

Page: 20 / 84

Before using for the first time

Removing the protective foil

and stickers



Remove

– the protective foil from the door.
– any stickers from the front and the

lid.



Please do not remove any labels

(e.g. the data plate), visible when you

open the door.

After installing the dryer



Before using the tumble dryer for

the first time, ensure that it is instal‐

led and connected to the electricity

supply correctly. If it has not been

transported as described in "Installa‐

tion and connection" then it must be

left to stand for at least 1 hour before

it is connected to the electricity sup‐

ply.

When the tumble dryer is switched on

the welcome display

Miele Willkommen

will appear briefly.

Setting the language

You will be asked to select the lan‐

guage you want for the display. It is

possible to change the language at any

time via

Settings

Language



deutsch

english (AUS)

english (GB)





You can scroll through the list by

touching the



and



sensors until

the language you want is highlighted

in the display.



Confirm your choice of language by

touching the

sensor.

Summary of Contents for TKR 350 WP





















































































Search results

Summary of Contents for TKR 350 WP

Reviews:

Related manuals for TKR 350 WP

Brands by name

Popular brands

Miele TKR 350 WP, Operating Instructions Manual

Search results

Summary of Contents for TKR 350 WP

Reviews:

Related manuals for TKR 350 WP

Brands by name

Popular brands