Cleaning and care
43
Cleaning the plinth filter
Pull the handle out of the plinth filter.
You can brush off a heavy build-up of
lint on the plinth filter or remove it
with a vacuum cleaner.
Clean the filter thoroughly under
running water.
Squeeze the water out of the plinth
filter thoroughly.
The plinth filter must not be replaced
dripping wet. This can cause a fault.
Use a damp cloth to remove any lint
from the handle.
Cleaning the plinth filter flap
Use a damp cloth to remove any lint.
Make sure that you do not damage
the rubber seal when doing this.
Check whether the cooling fins are
blocked with lint (as follows).
