Anti-crease setting
Helps prevent creasing if laundry is
not normally removed immediately
after the end of a programme.
The drum will turn at intervals for two
hours after the programme has
finished.
Anti-crease
– is set as a standard setting, can be
shortened or switched off
completely.
– can be used for all programmes,
except
Woolens handcare
.
– should always be switched on.
Follow steps (
A
,
B
,
C
...) with the
help of the
Start
button and
programme selector to programme
and store in memory.
Before you begin, first ensure that:
– The dryer is switched off.
– The door is closed.
– The programme selector is turned to
Finish
.
A
Press the
Start/Stop
button and keep
it pressed in whilst carrying out steps
B
-
C
.
B
Switch the dryer on.
C
Wait until
Start
lights up
constantly. . .
D
. . . and then release the
Start
button.
E
Turn the programme selector to
Cottons Normal
.
The
Finish/Anti-crease
indicator light
will flash 3 times.
The
flashing
Drying
indicator light
shows which option is selected.
– The
Drying
indicator light doesn't
flash:
Anti-crease is off.
– The
Drying
indicator light flashes
once:
1 h Anti-crease.
– If the
Drying
indicator light flashes
twice:
Factory default settings. 2 h
Anti-crease.
F
You can switch from one option to
the other by pressing the
Start
button
(
Drying
indicator light).
G
Switch the dryer off.
The setting you have selected is now
stored in memory. You can alter the
settings again at any time.
Control
^
Repeat steps
A
to
E
.
^
After checking the indicator lights
(see above), switch the dryer off.
Programmable functions
42
