Miele T 8001 WP SUPERTRONIC Operating Instructions Manual Download Page 32

Page: 32 / 72

To save names for Favourite programmes

Name: D r y _ _ _ _ _ _ _

10:21

[

Space

Delete character

)

g h i j k l m n o p q r s t u v w x

Select character

Confirm name

Select

Confirm name

To select a Favourite programme

Open the

Favourite programmes

menu. The saved

programmes are listed alphabetically.

Select the Favourite programme you want.

Confirm with the green

Start

sensor. The programme will be

started.

To change a Favourite programme

Select the

Change

option.

Select the Favourite programme that you want to change.

Change the Favourite programme and save it under the
same name. The modified parameters will be active when
the Favourite programme is started again.

To delete a Favourite programme

If 10 Favourite programmes are saved, you will need to delete
one of them before being able to save a new programme.

Select the

Delete

option.

Select the Favourite programme that you want to delete.

Confirm the deletion.

Favourite programmes

Summary of Contents for T 8001 WP SUPERTRONIC









































































Search results

Summary of Contents for T 8001 WP SUPERTRONIC

Reviews:

Related manuals for T 8001 WP SUPERTRONIC

Brands by name

Popular brands

Miele T 8001 WP SUPERTRONIC, Operating Instructions Manual

Search results

Summary of Contents for T 8001 WP SUPERTRONIC

Reviews:

Related manuals for T 8001 WP SUPERTRONIC

Brands by name

Popular brands