Programmable functions
Two additional functions can be pro-
grammed if required:
Child safety feature for programme
selection (
P 1
)
This feature is pre-programmed ex-
works as standard.
After the "START" touch pad has been
pressed it is not possible to change the
programme.
The only way to change the pro-
gramme is to switch off and start again.
Altering the degree of drying (
P 2
)
If you would prefer your washing to be
drier at the end of a programme, you
have the facility to reduce the degree
of residual moisture slightly in the fab-
rics for all programmes.
It is not possible to alter just one pro-
gramme.
This is not pre-programmed ex-works.
To select programming mode:
The machine must first be switched
off and the door closed.
Under the "Minimum iron" field press
and hold in the "" and
"Hand iron" touch pads, while at the
same time switching on the machine
with the On/Off button.
"
P
" appears in the Time display.
The individual function(s) can now be
selected and programmed in.
To call up and store the required pro-
grammable function(s):
Press the
>
touch pad under the Time
display once for
P 1
or twice for
P 2
.
To move from
P 2
to
P 1
press the
$
touch pad.
In the left of the display field "
P
" and
the number of the selected function
appear alternately. In the right of the
display field there appears
"
0
" if the function is not programmed,
"
1
" if the function is programmed in.
If you need to change from one to the
other press the "START" touch pad.
After the required function has been se-
lected and programmed:
Switch off the machine using the "On-
Off" button. The programmable func-
tion(s) is/are stored.
To cancel a programmable function:
Call up the programmable function in
question.
Press the "START" touch pad to dese-
lect, i.e. to bring up "
O
".
Switch off the machine using the "On-
Off" button.
13
Summary of Contents for T 586 C
Page 31: ......
