Programme selection
Once the delay start period has
elapsed the programme commences.
The control lights "time left" and "delay
start" light up, the
d
indicator light
goes out.
To delete the delay start function Press
the "Delay start" touch pad.
The programme commences immedi-
ately.
The "START" touch pad
The indicator light in the "START" touch
pad flashes as soon as the programme
is ready to be started. Press the
"START" touch pad. The programme
commences.
Selecting a programme
The programme can only be selected
when
the drum door is properly shut and
the machine is switched on.
Press the On-Off button, the indica-
tor lights for the basic programmes
light up.
Select the required programme
The indicator lights for the other pro-
grammes go out.
The indicator lights for the additional
options selected light up.
Once a programme has been
selected, the indicator lights for the
additional option(s) set the last time
the dryer was used, automa-
tically illuminate, (the so-called
memory function).
For timed drying the most recently
selected time appears in the display.
The following options are now available:
either use the programme as displayed
by simply pressing the "START" touch
pad, or change the programme as re-
quired.
Finally press the "START" touch pad.
Selecting additional features
For "temperature low" and "buzzer"
there are the following choices:
Use the additional options set for the
previous drying cycle,
or
change the additional option(s) by
pressing the relevant touch pad(s).
The indicator lights will either light up
for confirmation or go out.
Where an additional option has been
chosen, it can be cancelled by press-
ing once again on the relevant touch
pad.
Correct procedure for drying:
Load the drum
Close the door with a firm swing. Do
not push it shut.
Switch on the machine
Select a programme by pressing the
appropriate touch pad
Select additional option(s) if required
Select "Delay start" if required
Press "START" touch pad
11
Summary of Contents for T 586 C
Page 31: ......
