Miele T 4859 Ci SUPERTRONIC Operating Instructions Manual Download Page 31

Page: 31 / 76

Short

For drying fabrics which can withstand
higher temperatures and have

on the

care label. Do not use on minimum iron
or delicate fabrics.

– This option uses a higher

temperature for a shorter drying time.

Low temperature

Delicate and minimum iron fabrics with
the

symbol on the care label (e.g.

acrylic garments) are dried at a lower
temperature.

– This option uses a lower temperature

and a longer drying time.

Note

You can also alter the drying levels and
cooling down periods for some
programmes (see "Settings menu").

This dryer also has a buzzer and an
anti-crease phase at the end of the
programme which can be altered (see
"Settings").

Optional extras

This dryer offers the following extras:

Short

Low

temperature

Cottons

Minimum iron

Warm air

However, You have to choose either
the

Short

or the

Low temperature

option.

Extras

Summary of Contents for T 4859 Ci SUPERTRONIC













































































Search results

Summary of Contents for T 4859 Ci SUPERTRONIC

Reviews:

Related manuals for T 4859 Ci SUPERTRONIC

Brands by name

Popular brands

Miele T 4859 Ci SUPERTRONIC, Operating Instructions Manual

Search results

Summary of Contents for T 4859 Ci SUPERTRONIC

Reviews:

Related manuals for T 4859 Ci SUPERTRONIC

Brands by name

Popular brands