Installation
Sizing the toekick
The appliance toekick visible below the
door can be partially concealed by in-
stalling a custom made toekick that
matches the adjacent cabinetry.
Please note:
The depth of recess
and height of the appliance toekick
cannot be altered.
The length of the matching toekick
should be 23 5/8’’. Maximum toekicks
heights are listed below.
Height from
the floor to
the bottom of
the counter-
top
Number of
spacer
frames
required
Maximum
toekick
height
32 1/4’’
34 1/4’’
36 1/4’’
none
1
2
3 15/16’’
5 15/16’’
7 7/8’’
Installing the toekick
Align the small template with the
upper rear edge of the toekick, and
tape it in place.
Cut out portions of the toekick by fol-
lowing the template.
Align and attach the two Velcro
strips to each other. Cut the strip into
three equal pieces.
Remove the protective backing from
one side of the three Velcro strips.
Press them into place on the dryer
toekick. Avoid placing them over the
ventilation grills if possible.
Peel the protective backing off of the
second, exposed side of the Velcro
strip.
Align the matching toekick with the
machine toekick and press it firmly
into place.
24
