Miele Swing H1, Operating Instructions Manual

Page: 16 / 48

Cleaning the floor roller of the floor
brush AllTeQ, see fig. 34
(depending on model)
a
Release the roller pin using a coin.
b
Push and take out the roller axle.
c
Take out the roller.
Remove all threads, hair etc. and
reinstall the roller and lock the roller pin.
Cleaning and care
,
Turn off the vacuum and unplug
it from the outlet before performing
any maintenance work.
Vacuum cleaner and accessories
The vacuum cleaner and other plastic
accessories can be cleaned with a
damp cloth or a cleaner suitable for
plastics.
,
Do not use abrasive, oil-based,
glass or all purpose cleaners!
Dust compartment
The dust compartment can, if
necessary, be cleaned using a
dry
cloth, dusting brush or a second
vacuum to remove any dust.
,
Do not submerge the vacuum in
water. If moisture gets into the
appliance there is the risk of an
electric shock.
Frequently asked questions
The vacuum cleaner shuts off
automatically.
If the vacuum cleaner has overheated
the temperature limiter will automatically
turn off the vacuum cleaner.
This can occur if, for example, large
articles block the suction tube or when
the filter bag is full or contains particles
of fine dust. A heavily soiled exhaust or
dust compartment filter can also be the
cause of overheating. In this case, turn
off the vacuum cleaner and unplug it
from the outlet.
Once the cause has been addressed,
allow the vacuum cleaner to cool for
approx. 20 - 30 minutes before
resuming vacuuming.
Technical Service
In the event of a fault which you cannot fix
yourself please contact the Miele Service
Department at the phone number listed
on the back of this booklet.
^
Please quote the model type of your
appliance.
This can be found on the data plate on
the bottom of the vacuum.
en
16