manualshive.com logo in svg

Miele SmartLine CS 7612, User Manual

Share
Download
Miele SmartLine CS 7612 User Manual Download Page 35

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Safety features

34

System lock / Safety lock

The lock function is deactivated if
there is a break in the mains supply.

Your SmartLine element is equipped
with a system lock and a safety lock to
prevent the element from being
switched on or any settings being
altered by mistake.

The 

system lock

 is activated when the

SmartLine element is switched on. If the
system lock is activated, the element
cannot be switched on and the timer
cannot be used. A set minute minder
time continues to count down. The
SmartLine element is programmed so
that the system lock must be activated
manually. It can be programmed to be
activated automatically 5 minutes after
the SmartLine element has been
switched off if it is not manually locked
first (see “Programming”).

The 

safety lock

 is activated when the

SmartLine element is switched on.
When the safety lock is activated, the
element can be operated only under
certain conditions:

– Selected power levels cannot be

changed.

– A set minute minder time can be

modified.

– The SmartLine element can only be

switched off.

If an unavailable sensor control is
touched whilst the system lock or
safety lock is activated 



 will appear

in the timer display for a few seconds
and a tone will sound.

Activating the system lock

Touch the 

 sensor for 6 seconds.

The seconds can be seen counting
down in the timer display. When this
time has elapsed 



 will appear in the

timer display. The system lock has been
activated.

Deactivating the system lock

Touch the 

 sensor for 6 seconds.



 will appear briefly in the timer dis-

play and then the seconds will be seen
counting down. The system lock is de-
activated once the time has elapsed.

Summary of Contents for SmartLine CS 7612














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands