manualshive.com logo in svg

Miele SmartLine CS 7612, User Manual

Share
Download
Miele SmartLine CS 7612 User Manual Download Page 19

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Before using for the first time

18

Please stick the extra data plate for
the appliance supplied with this doc-
umentation in the space provided in
the “After sales service” section of
this booklet.

Remove any protective wrapping and
stickers.

Cleaning the SmartLine ele-
ment for the first time

Before using for the first time, clean
the hob with a damp cloth only and
then wipe dry.

Switching on the SmartLine
element for the first time

The metal components have a protect-
ive coating. Smells and possibly some
vapours may occur when the SmartLine
element is used for the first time. The
heating of the induction coils also
causes odours in the first few hours of
operation. With each subsequent use,
the odour is reduced until it disappears
completely.

The smell and any vapours given off do
not indicate a faulty connection or ap-
pliance and they are not hazardous to
health.

Please note that the heating up time
on induction hobs is very much
shorter than on conventional hobs.

Summary of Contents for SmartLine CS 7612














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands