manualshive.com logo in svg

Miele SmartLine CS 7612 FL, Operating And Installation Instructions

Share
Download
Miele SmartLine CS 7612 FL Operating And Installation Instructions Download Page 35

Timer

35

Auto switch-off

You can set a time after which the
cooking zone will switch off
automatically. This function can be
used on all zones at the same time.

If the time programmed is longer than
the maximum operational time
allowed, the safety switch-off will
switch off the cooking zone after the
maximum permitted safety time has
elapsed (see "Safety features - Safety
switch-off").

The switch-off time is set with the
numerical keybank for each cooking
zone you want to switch off
automatically.

Setting the switch-off time

Select a power level for the cooking
zone you wish to use.

Touch the 

 sensor.

The timer display flashes.

Set the required time.

Touch the 

 sensor or wait 10 seconds

to start the switch-off time.

The cooking zone allocation auto
switch-off indicator light pulsates.

To set a switch-off time for another
cooking zone, follow the same steps
as described above.

If more than one switch-off time is
programmed, the shortest time left will
be displayed, and the corresponding
indicator light will pulsate. The other
indicator lights will light up constantly.

If you want to show the time left for
other cooking zones in the
background, touch the 

 sensor of

the desired cooking zone.

Changing the switch-off time

Touch the 

 sensor repeatedly until

the indicator light for the cooking
zone you require pulsates.

The timer display flashes.

Set the required time.

Deleting the switch-off time

Touch the 

 sensor repeatedly until

the indicator light for the cooking
zone you require pulsates.

The timer display flashes.

Touch the 

 sensor on the numerical

keybank.

Summary of Contents for SmartLine CS 7612 FL

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands