manualshive.com logo in svg

Miele SmartLine CS 7612 FL, Operating And Installation Instructions

Share
Download
Miele SmartLine CS 7612 FL Operating And Installation Instructions Download Page 10

Warning and Safety instructions

10

 

During installation, maintenance and repair work, the appliance

must be disconnected from the mains electricity supply. It is only
completely isolated from the electricity supply when:

- the mains circuit breaker is switched off, or

- it is switched off at the wall socket and the plug is withdrawn from

the socket. Do not pull the mains connection cable but the mains
plug to disconnect your appliance from the mains electricity
supply.

 

Danger of electric shock! If the ceramic surface is faulty, cracked,

chipped or damaged in any way, do not use the cooktop and switch
it off immediately. Disconnect the cooktop from the electricity
supply. Contact Miele.

 

If the cooktop is installed behind a furniture door, do not close the

door while the cooktop is in operation. Heat and moisture can build
up behind the closed door. This can result in damage to the cooktop,
the housing unit and the floor. Do not close the door until the
appliance has cooled down and the residual heat indicators have
gone out.

 

In areas which may be subject to infestation by cockroaches or

other vermin, pay particular attention to keeping the appliance and
its surroundings clean at all times. Any damage caused by
cockroaches or other vermin will not be covered by the warranty.

 

DO NOT MODIFY THIS APPLIANCE.

Summary of Contents for SmartLine CS 7612 FL

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands