Converting to another gas type
*INSTALLATION*
67
Fit the correct jets securely (see jet
table).
Secure the jets against inadvertent
loosening with sealing wax.
Functional check
Check all gas fittings for leaks.
Reassemble the hob.
Ignite all burners to check that they
are operating correctly.
- The flame must not go out on the
lowest setting, or when the control is
turned quickly from the highest to the
lowest setting.
- On the highest setting, the flame
must have a distinctive and visible
core.
Adhere the label supplied with the
jets, stating the type of gas being
used.
Summary of Contents for SmartLine CS 7101-1
Page 18: ...Guide to the appliance 18 Wok a Wok burner b Trivet c Rotary controls ...
Page 44: ...Installation INSTALLATION 44 Worktop cutout surface mounted ...
Page 69: ......
Page 70: ......