Timer - use
Programming cooking time
With the timer it is possible for both the
front hob cooking zones to be switched
off automatically, or set to come on at a
later time and then also be switched off.
A symbol in the display shows which
hob zone is being programmed:
*
= front left zone
#
= front right zone
t
= both front zones
Turn the hob zone control to the set-
ting required.
The corresponding symbol will flash for
a short time.
Enter the times for the automatic pro-
cess.
When a
cooking process has been
pre-selected
the hob zone symbol
flashes next to the time of day display.
When the process starts running
,
the symbol for the chosen hob zone
lights up next to the time of day.
When the
end of cooking time is
reached
– the hob switches off automatically.
– an audible tone sounds for approx.
5 seconds.
– the symbol for the selected hob
zone and the “
)
” symbol both
flash.
If the audible tone is not switched off,
as described earlier, it will repeat at 5
minute intervals as a reminder that the
end time has been reached. This
re-
minder
continues for up to an hour.
Both the audible tone and the visual
display can be cancelled by:
– Turning the hob zone control to “0”.
– Pressing the “
)
” button.
12
Summary of Contents for SE 247
Page 23: ...23 ...
