Park-System
A Park-System has been designed for
conveniently parking the vacuum
cleaner during pauses and for carrying
as well as for storage. A special
parking attachment is fitted to all floor
brushes, except the Electrobrush
SEB 236 which can stand by itself.
^
Insert the lower clip on the floor brush
into the slot on the end of the vacuum
cleaner from above.
Turning on and off with the
Park-System
Parking the floor brush while
vacuuming automatically turns off the
vacuum without needing to press the
On-Off switch. Lifting the floor brush out
of the Park-System turns the vacuum
back on.
Transport and storage
^
Stand the vacuum cleaner vertically.
^
Fit both clips on the floor brush into
the two point holder on the side of the
vacuum.
The adapter
a
has to be inserted
when using the standard floor brush,
the turbobrush, the hard floor brush
and the parquet floor brush.
Setting down, transport and storage
29
Summary of Contents for S 558
Page 2: ...2 ...
Page 14: ...Guide to the vacuum cleaner 14 ...
Page 45: ... Connect the vacuum cleaner only to a 120 V 60 Hz 15 A outlet Electrical connection 45 ...
Page 47: ...47 ...