Miele PWM 506 Mop Star 60 Operating And Installation Instructions Download Page 64

Page: 64 / 84

Installation

*INSTALLATION*



Secure the transit bars to the back of
the washing machine.

Tip:

Make sure that the holes



are fit-

ted over the retainers





Risk of damage from incorrect

transport.
The washing machine may become
damaged if moved without the transit
bars in place.
Keep the transit bars in a safe place.
Fit them again if the machine is to be
moved.

Refitting the transit bars

The transit bars are refitted by reversing
the procedure.

Levelling the washing machine

The washing machine must stand per-
fectly level on all four feet to ensure
safe and proper operation.

Incorrect installation may increase elec-
tric and water consumption and may
cause the machine to move about.

Screwing out and adjusting the feet

The 4 adjustable screw feet are used for
levelling the washing machine. The ma-
chine is supplied with all four feet
screwed in.



Using the spanner supplied, turn
counter nut

in a clockwise direction.

Then turn counter nut

together with

foot

to unscrew.

Summary of Contents for PWM 506 Mop Star 60





















































































Search results

Summary of Contents for PWM 506 Mop Star 60

Reviews:

Related manuals for PWM 506 Mop Star 60

Brands by name

Popular brands

Miele PWM 506 Mop Star 60, Operating And Installation Instructions

Search results

Summary of Contents for PWM 506 Mop Star 60

Reviews:

Related manuals for PWM 506 Mop Star 60

Brands by name

Popular brands