Miele PW 6241 EL, Installations Plan

Page: 33 / 102

en - Technical data
33
Voltage versions and electrical data
Standard: Convertible to:
Supply voltage 3 AC 220 - 240 V 3 AC 208 V
Frequency 50 Hz 60 Hz
Power rating 25 kW 20 kW
Fuse rating (on site) 3 x 80 A 3 x 70 A
Connection cable, min. cross-section 4 x 25 mm² 4 x 25 mm²
Cable gland M40 x 1,5 mm M40 x 1,5 mm
Standard: Convertible to:
Supply voltage 3 AC 220-240V 3 AC 220-240V
Frequency 50 Hz 60 Hz
Power rating 25 kW 25 kW
Fuse rating (on site) 3 x 80 A 3 x 80 A
Connection cable, min. cross-section 4 x 25 mm² 4 x 25 mm²
Cable gland M40 x 1,5 mm M40 x 1,5 mm
Standard: Convertible to:
Supply voltage 3N AC 380–415 V 3N AC 380-415 V
Frequency 50 Hz 60 Hz
Power rating 25 kW 25 kW
Fuse rating (on site) 3 x 50 A 3 x 50 A
Connection cable, min. cross-section 5 x 16 mm² 5 x 16 mm²
Cable gland M16 x 1,5 mm M16 x 1,5 mm
Standard: Convertible to:
Supply voltage 3N AC 380-415V 3N AC 380-415V
Frequency 50 Hz 60 Hz
Power rating 10,5 kW 10,5 kW
Fuse rating (on site) 3 x16 A 3 x16 A
Connection cable, min. cross-section 5 x 1,5 mm² 5 x 1,5 mm²
Cable gland M16 x 1,5 mm M16 x 1,5 mm
Supply voltage 3 AC 440V
Frequency 60 Hz
Power rating 25 kW
Fuse rating (on site) 3 x 50 A
Connection cable, min. cross-section 5 x 16mm²
Cable gland M16 x 1,5 mm
Miele recommends connecting the machine via a wall socket with an all-pole means of deactivation and interlock in accordance with
IEC 60309 and IEC 60947 so that electrical safety checks can be carried out easily.
For hard-wired machines, an isolator in accordance with IEC 60947 must be installed.
The wall socket or isolator must remain accessible at all times once the machine has been installed.
To increase safety, Miele recommends installation of a residual current device (RCD). Only use residual current devices that are
sensitive to universal current (type B).
Connection for equipotential bonding
Connection with male thread (machine) 10 mm x 30 mm (3/8" x 1 3/16")
Size of washers and nuts M 10
An equipotential bond with good contact connection must always be provided in accordance with all national and local regulations.