Miele PW 6065 Vario, Operating And Installation Instructions

Page: 30 / 64

Maximum final spin speed
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that permitted for the
programme selected.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed.
To omit the final spin (Rinse hold)
^
Select Rinse hold from the Extras
sub-menu. The laundry will not be
spun and will remain suspended in
the final rinse water. This reduces
creasing if the laundry is not going to
be removed from the drum
immediately after the end of the pro-
gramme.
– To start the final spin:
The machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the
Start button.
– To end the programme:
Press the
a
button. The water will
drain away. Press the door button
a
again, to open the door.
To omit the spin between rinses and
the final spin
^
Select Without spin from the Spin
speed sub-menu . The laundry is not
spun after the final rinse. The water
will drain away and the machine will
go straight into the anti-crease stage.
Spinning
30