Changing the light bulb
The machine will not operate if the light
bulb is burnt out.
^
Disconnect the power supply to the
work area by unplugging the unit,
tripping the circuit breaker or
removing the fuse.
^
Open the detergent dispenser
drawer. Remove the tool from the rear
side of the panel.
^
Open the drum door.
^
Insert the tool into the slit of the light
bulb, turn counterclockwise until
resistance is felt.
^
Pull out the drum lighting.
^
Press together the hooks of the
plastic fitting,
2
, to separate it from
the bulb,
1
.
^
Replace the bad light bulb with a
new one.
A replacement bulb can be obtained by
contacting Miele.
The light bulb must not exceed the
maximum wattage listed on the data
plate.
^
Insert the light bulb into the plastic
fitting.
^
Insert the drum lighting in the socket
and turn clockwise.
To use the washer it is absolutely
necessary to have the light bulb
properly installed.
Frequently asked questions
38
Summary of Contents for PW 5065
Page 40: ...40 ...
Page 64: ...Alteration rights reserved 0806 M Nr 06 787 080 01 en USA ...