Miele PT 8407 D, Installations Plan

Page: 11 / 13

Technical datasheet
Tumble dryer:
Heating: PT 8407
Steam (D)
Legend: Abbreviations in bold type:
Connection required
en - US
Abbreviations in circle with dashes:
Connection optional or required depending on model version
Optional extras:
BS Concrete base Quality and density of concrete must comply with load.
Concrete base must be firmly secured to floor!
Recommended height 3 15/16“ 100 mm
Minimum height 1 31/32“ 50 mm
Minimum width 35 7/16“ 900 mm
Minimum depth 47 1/4“ 1200 mm
DAV Steam
connection
valve
The steam connection valve to regulate the steam supply
must be provided on site.
The following valves can be ordered separately as electric
steam valves or as pneumatic steam valves.
Pneumatic steam valve (PND)
Regulatable steam pressure 0 - 145 psi 0 - 1000 kPa
Connection gauge ½“
Supply point and pneumatic valve controls must be
provided on site.
Machine connections:
Electrical
connection
(convertible)
Standard voltage 3 AC 208V
Frequency 60 Hz
Rated load 4438.8 BTU/h 1.3 kW
Fuse rating 3 x 10 A
Connection cable, min. cross-section 4 x AWG 16 4 x 1.5 mm²
Connection cable to be ordered separately
Convertible to
3 AC 220-240V
Frequency 60 Hz
Rated load 4439 BTU/h 1.3 kW
Fuse rating 3 x 10 A
Connection cable, min. cross-section 4 x AWG 16 4 x 1.5 mm²
Connection cable to be ordered separately
Electrical connection must comply with national regulations.
Connection using multi-pole wall socket in compliance with IEC/EN 60309 and IEC/EN 60947 is
recommended in order to simplify electrical tests.
If machines are hard-wired, a multi-pole switch must be provided on site.
A wall socket or isolator must be accessible after installation.
Installation plan: PT 8407 D
Date: 16-Oct-2014 Page: 11