Miele PT 8301 SL, Operating Instructions Manual

Page: 8 / 44

Control panel PT 8303 Profitronic B Plus Residual moisture programmes
1 2
3 4 5 6 7 8
1 Segment display - Residual moisture 2 Programme sequence display
3 Low temperature (additional option) button 4 Venting system fault indicator
5 Fluff filter fault indicator 6 START/STOP button
7 Programme selection rotary control 8 On/Off switch
Mains On/Off switch
s
Switches the machine on or off.
Low temperature (additional option) button
K
Lowers the drying temperature (by approx. 20°C).
Use for delicate fabrics (e.g. synthetics). The LED will
light up.
Programme selection rotary control
For selecting the drying programme.
A: Minimum iron
Dry
10% moisture
20% moisture
B: Cottons
Extra dry
Dry
20% moisture
Delicates 25% moisture
40% moisture
Woollens
Timed drying warm air Timed drying cool air
START/STOP button
Press the Start/Stop button to start or stop the drying
programme.
Segment display
Before the start of a programme this shows the
residual moisture which has been allocated to the
programme as a %.
After the start of a programme it shows the residual
moisture which is currently in the laundry until the
programme is finished.
It also shows fault messages, see "Problem solving
guide".
It can also show
h
for "Peak load cut-out" (optional).
Programme sequence display
The programme sequence is displayed in three
stages. The stage the programme is at will be
highlighted in yellow.
!
Drying
L
Cooling down
O
Programme finished / Anti-crease
Check venting system
0
fault indicator
This will light up if there is a problem with the venting
system.
Clean the fluff filter
W
fault indicator
This will light up when the fluff filter needs to be
cleaned.
Description of tumble dryer PT 8303
8