Miele PT 8301 SL, Operating Instructions Manual

Page: 14 / 44

Error messages
Indicator Possible cause Remedy
N 0
Over-pressure in vent ducting.
Leaks in the airways.
Check the vent ducting.
Call the Miele Service Department.
N W
Fluff filter blocked Clean the fluff filter.
The dryer does not start. The fluff filter compartment flap is not
closed properly. Twist the lock for the fluff filter compartment
flap in a clockwise direction as far as it will
go.
Other messages
Peak load cut-out
The dryer will continue to run without
heating (cold) for the remainder of the
programme. If the peak load cut-out is overridden, the
programme will continue as normal.
In the event of any faults please contact the Miele Service Department.
When contacting the Service Department, please quote the Model, Serial number (SN:)
and Material number (M.Nr) of your dryer.
See data plate for details:
The data plate is located at the top of the door aperture
with the door open or at the top of the rear of the machine.
Problem solving guide
14