en - Drying in programme card or coin operation mode
21
Resolving programme card errors
If the programme card is inserted into the slot the wrong way round, the following message
will appear in the display:
Card incorrectly inserted in card reader.
Card fault
Remove the programme card from the card reader.
Reinsert the right side of the programme card into the card reader.
If the programme card is not suitable for this model of machine, the following message will
appear in the display:
Card operation
Programmes on the card are only suitable
for machine type ??.
Example display: programmes unsuitable for this model of machine on the programme card
Remove the programme card from the card reader.
Use a programme card suitable for the available machine model.
Laundry load card operation
A laundry load that requires a special process is assigned to a card with the corresponding
programme. Only this one programme is found on this programme card.
This function can be activated via the
Card access
menu option in the Supervisor level. The
tumble dryer controls will then only accept programme cards for laundry loads (on which
there is one programme). The internal programmes in the tumble dryer can no longer be
accessed.
Drying with payment system C 4060/C 4065/C 4070
When drying with a payment system, the following operating steps must be observed in
the same order to avoid losing money or tokens.
1. Load the laundry and close the drum door.
2. Press the
button.
3. Select a programme
4. Insert money or token into the payment system.
5. Press the
button.
Summary of Contents for PT 8257 WP
Page 49: ...en Dimensions 49 PT 8257 WP PT 8337 WP ...
Page 103: ...nl Afmetingen 103 PT 8257 WP PT 8337 WP ...
Page 107: ......
