Technisches Datenblatt / Technical datasheet: PT 7186 EL
Datum / Date: 28.10.2009
Seite / Page: 10
Fittings
(supplied)
Miele plinth UG/UO 6008
4 × fasteners (to secure machine to plinth)
4 × screws DIN 571 (Ø × length)
mm
8 × 65
4 × rawl plugs (Ø × length)
mm
12 × 60
Machine must be bolted to the floor!
Fixing materials for floating screed floor to be provided on site
Miele plinth US 6008
4 × fasteners (to secure machine to plinth)
4 × screws DIN 571 (Ø × length)
mm
6 × 50
4 × rawl plugs (Ø × length)
mm
8 × 40
Machine must be bolted to the floor!
Fixing materials for floating screed floor to be provided on site
On concrete plinth
2 × metal brackets
mm
6 × 50
2 × screws DIN 571 (Ø × length)
mm
8 × 40
2 × rawl plugs (Ø × length)
Machine must be bolted to the floor!
Fixing materials for floating screed floor to be provided on site
Machine data
Machine width
mm
700
Machine depth
mm
763
Machine height
mm
1020
Casing width
mm
692
Casing depth
mm
690
Min. access width to installation site
mm
720
Minimum rear wall gap (measured to front of machine)
mm
1100
Minimum wall gap (to front edge of machine)
With an installation with the minimum gap, additional work
may be required when service or repair work is necessary.
mm
900
Net weight
kg
77
Dynamic floor load, max.
N
1000
Static floor load, max.
N
Not yet available
Average heat dissipation
(dependent on ambient room temperature and programme
selected)
W
450
Sound pressure level (re 20 mPa),
(measured at a distance of 1 m from the machine and at a
height of 1.6 m)
dB (A)
<70
Installation should only be carried out by authorised fitters in accordance with valid regulations!
Observe installation instructions when installing machine! All rights reserved! Dimensions in mm