Miele ProLine CS 1018 Operating And Installation Instructions Download Page 3

Page: 3 / 64

Contents

Warning and Safety instructions

.......................................................................... 5

Caring for the environment

................................................................................ 16

Overview

............................................................................................................... 17

Wok burner ............................................................................................................  17
Operating controls.................................................................................................  18
Burner....................................................................................................................  19
Accessories supplied ............................................................................................  20

Before using for the first time

............................................................................ 21

Cleaning the ProLine element for the first time ..................................................... 21
Switching on the ProLine element for the first time .............................................. 21

Suitable cookware

............................................................................................... 22

Wok ring ................................................................................................................ 23

Tips on saving energy

........................................................................................ 24

Operation

.............................................................................................................. 25

Switching on..........................................................................................................  25
Adjusting the flame................................................................................................  26
Switching off..........................................................................................................  26

Safety features

..................................................................................................... 27

Thermo-electric flame failure monitor ................................................................... 27

Cleaning and care

............................................................................................... 28

Cleaning the burner.......................................................................................... 30
Assembling the burner ..................................................................................... 31

Problem solving guide

........................................................................................ 32

Optional accessories

.......................................................................................... 34

Safety instructions for installation

..................................................................... 35

Safety distances

.................................................................................................. 36

Installation notes

................................................................................................. 40

Building-in dimensions

....................................................................................... 41

Summary of Contents for ProLine CS 1018

































































Search results

Summary of Contents for ProLine CS 1018

Reviews:

Miele ProLine CS 1018, Operating And Installation Instructions, Page: 3 / 64

Search results

Summary of Contents for ProLine CS 1018

Reviews: