Miele ProLine CS 1013-1 Operating And Installation Instructions Download Page 55

Page: 55 / 60

Conversion to another type of gas

*INSTALLATION*

Changing the jets



Disconnect the cooktop from the
electricity supply and turn off the gas
supply.

When converting to another type of
gas, both the main

and

small jets

need to be changed.



Remove the pan support, burner
cap



and burner head



Changing the main jet



Using an M7 socket spanner,
unscrew the main jet





Fit the new jet (see jet table) and
tighten it securely.

Changing the small jets

The upper part of the appliance has to
be removed before the small jet can be
changed.



Pull the control knobs off.



Undo the screws





Lift the top of the appliance off
carefully.



Using a small screwdriver, unscrew
the small jet



in the gas fitting.



Pull out the jet with a pair of pliers.



Fit the new jet (see jet table) and
tighten it securely.



Secure the jets against inadvertent
loosening with sealing wax.

Summary of Contents for ProLine CS 1013-1





























































Search results

Summary of Contents for ProLine CS 1013-1

Reviews:

Related manuals for ProLine CS 1013-1

Brands by name

Popular brands

Miele ProLine CS 1013-1, Operating And Installation Instructions

Search results

Summary of Contents for ProLine CS 1013-1

Reviews:

Related manuals for ProLine CS 1013-1

Brands by name

Popular brands