Miele PDR 914 Operating And Installation Instructions Download Page 49

Page: 49 / 54

Supervisor level

Peak load prevention

With this function, the application of a hygiene programme is not amended when a peak
load signal is in place. The heater stays switched on.

- Factory default: Off

- On

COM module selection

This tumble dryer is equipped with an integrated WiFi module. However, the dryer can
also be equipped with an external module.

- Off

- Internal module (factory default)

The internal WiFi module is used.

- External module

An XKM module or RS232 module is inserted into the module slot.

Availability of Miele digital products

The ability of Miele digital products depends on the availability of the services in your
country.

The different services are not available in all countries.

For information about availability, please visit www.miele.com.

WiFi / LAN

Control the networking of your tumble dryer.

- Setup

This message only appears if the tumble dryer has not yet been connected to a WiFi net-
work.

- Deactivate (visible when the network is activated)

The network remains set up; the WiFi function is switched off.

- Activate (visible when the network is deactivated)

The WiFi function is reactivated.

- Connection status (visible when the network is activated)

The following values are displayed:

– The quality of WiFi reception

– The network name

– The IP address

- Reset (visible when set up)

Resets the WiFi login (network) to immediately re-establish a new connection.

- Reset (visible if already set up)

The network is no longer set up. A new connection has to be established in order to use
the network again.

– The WiFi is switched off

– The WiFi connection will be reset to the factory default setting

Summary of Contents for PDR 914























































Search results

Summary of Contents for PDR 914

Reviews:

Related manuals for PDR 914

Brands by name

Popular brands

Miele PDR 914, Operating And Installation Instructions

Search results

Summary of Contents for PDR 914

Reviews:

Related manuals for PDR 914

Brands by name

Popular brands