Miele PDR 908 EL Operating And Installation Instructions Download Page 42

Page: 42 / 96

Programme chart

Sport

Sportswear

Max. load 3 kg*

Items

Sportswear which is suitable for drying in a tumble dryer.

Notes

This programme only dries to the

Normal

level.

Outerwear

Max. load 2.5 kg*

Normal, Hand iron plus

Items

Outerwear which is suitable for drying in a tumble dryer.

Proofing

Max. load 2.5 kg*

Items

Microfibre fabric, ski wear, outerwear, fine close weave cotton
garments (poplin), or tablecloths which are suitable for drying in a
tumble dryer and have been treated to provide a water and dirt-
resistant finish.

Notes

– This programme includes a proofing fixing phase.

– Only use proofing agents which are stated by the manufacturer as

being “suitable for use on membrane textiles”. These agents
contain fluorochemical compounds.

– Do not dry items which have been treated with proofing agents

containing paraffin. This substance is a fire hazard.

– This programme only dries to the

Normal

level.

Reactivation

Max. load 2.5 kg*

Items

Outerwear which is suitable for drying in a tumble dryer.

Notes

– The drying process revitalises the fibres, which improves water-

repelling properties.

– This programme only dries to the

Normal

level.

Summary of Contents for PDR 908 EL

































































































Search results

Summary of Contents for PDR 908 EL

Reviews:

Related manuals for PDR 908 EL

Brands by name

Popular brands

Miele PDR 908 EL, Operating And Installation Instructions

Search results

Summary of Contents for PDR 908 EL

Reviews:

Related manuals for PDR 908 EL

Brands by name

Popular brands