en - Warning and Safety instructions
134
The programme ends when the cooling phase starts. Many programmes are followed by
the cooling phase to ensure that the items of laundry are kept at a temperature that will not
cause them damage (for instance to prevent the risk of the laundry self-igniting). Always re-
move all items of laundry from the tumble dryer immediately after the end of the pro-
gramme/cooling phase.
Fabric conditioner and similar products must be used according to the instructions on
the manufacturer's packaging.
For tumble dryers with stainless steel surfaces:
The stainless steel surfaces must not come into contact with liquid cleaning and disinfect-
ing agents which contain chlorine or sodium hypochlorite. These agents can have a cor-
rosive effect on stainless steel.
Aggressive vapours containing chlorine can also be corrosive.
Do not store containers of these agents near the tumble dryer.
Accessories
Accessory parts may only be fitted when expressly approved by Miele. If other parts are
used, warranty, performance and product liability claims will be invalidated.
Miele cannot be held liable for damage caused by non-compliance with these Warn-
ing and Safety instructions.
Summary of Contents for PDR 514
Page 2: ...2 de 5 fr 36 it 67 nl 97 en 128 ...
Page 15: ...de Bedienung des Trockners 15 Position 60 Zeitprogramm 60 Minuten Position Gerät aus ...
Page 107: ...nl Bediening van de droger 107 Positie 60 Tijdprogramma 60 minuten Positie apparaat uit ...
Page 138: ...en Operating the tumble dryer 138 position 60 Timed programme 60 minutes position machine off ...
