Problem solving guide
53
Other problems
Problem
Cause and remedy
There are humming
noises.
The compressor is operating.
These noises are quite normal and do not indicate a
fault.
A programme does not
start.
There is no obvious cause.
Connect the tumble dryer to the mains.
Turn on the tumble dryer.
Close the tumble dryer door.
Check whether the mains fuse has tripped.
Only the
Start/Stop
sensor control is flash-
ing.
10 minutes after the end of the programme, the
Start/
Stop
sensor control will begin to flash and the indic-
ators will go out to save energy. This is not a fault,
but a normal function.
The drum will turn at intervals when the tumble dryer
is in the Anti-crease phase.
Touch a sensor control to switch on the indicators.
See “Programmable functions“, “
Control field
switch-off status”.
The tumble dryer is
switched off at the end
of the programme.
This tumble dryer switches off automatically to save
energy. This is not a fault, but a normal function.
To switch the tumble dryer on, select a pro-
gramme.
The drum lighting does
not come on.
The drum lighting switches off automatically when
the door is closed.
To save energy, the drum lighting will switch off
after a few minutes if the door is left open for an ex-
tended period.
The drum lighting will come on when the door is
opened if the tumble dryer is switched on.
