background image

Only use high efficiency, low
sudsing laundry detergent formu-
lated for front loading washing ma-
chines.

For wool and wool blend fabrics use a
detergent formulated for wools.

Follow instructions on the detergent
packaging for the correct use and
amount of detergent. Please adjust the
amount of detergent if the load is
smaller or more or less soiled than nor-
mal.

Add detergent to compartment

j

at

the beginning of each wash program.
Only add detergent (

1

/

4

total recom-

mended amount) to compartment

i

if

the "Heavy soil" option was selected.

If you select the "Heavy soil" option and
you are using liquid detergent, insert
the liquid detergent insert into compart-
ment

j

. This will prevent the deter-

gent for the main wash being used in
the first wash of the "Heavy soil" option.

Do not use chlorine bleach!

Water hardness

Hardness

level

Water

quality

Water

hardness

ppm

1

soft

0 - 130

2

middle

130 - 250

3

hard to

very hard

over 250

Water softener

If your water hardness level is between
2 and 3 the water can be softened to
reduce detergent consumption.

Use the recommended amount of de-
tergent for water hardness level 1 and
then add a water softener to the deter-
gent dispenser.

Detergent

14

Summary of Contents for NOVOTRONIC W 1986





















































Reviews: