Problem solving guide
Any work done on the electrical components of this appliance should
only be performed by a qualified and trained person in accordance with all
local and national codes and regulations. Unauthorized repairs may result
in personal injury and damage to the machine.
What to do if, . . .
Cause . . .
Remedy . . .
. . . The programme does not
start?
There is no power.
The “ON” indicator lamp has
not lit up.
Check that..:
–
the door is properly closed.
–
the machine is plugged in.
–
the fuse or circuit breaker
has not tripped.
There is power and the “ON”
indicator lamp is on, but the
programme selector has not
been turned to the “Start/Finish”
position.
–
Turn the programme selector
to the “Start/Finish” position.
–
Select a programme.
. . . The “Check
p
/
q
” indi-
cator lamps are flashing?
The “Check
p
” indicator lamp
is flashing, and the programme
has started.
The water inlet is blocked.
–
The inlet valve is not opened
far enough.
–
The inlet hose is kinked.
–
The water pressure is too
low. Call the Service Dept.
The “Check
q
” indicator lamp
is flashing.
The drain is blocked.
–
Clean the drain pump and
lint trap.
–
Has the drain hose been
installed too high? (max drain
height = 4 feet)
Problem solving guide
31
Summary of Contents for NOVOTRONIC W 1926
Page 47: ...47 ...
