Miele Novotronic Premier Novo Operating Instructions Manual Download Page 18

Page: 18 / 64

Programme . . .

. . . interruption

Press the I-ON/0-OFF button.

To continue with the same
programme press the I-ON/0-OFF
button again.

. . . alteration

The machine will accept the following
changes after the START button has
been pressed,

– selection of a different temperature,

extra selection or de-selection of the

Water plus

option can be carried out

up to 6 minutes after start.

– the spin speed for final spin can be

changed if the programme permits.

After start it is no longer possible to se-
lect a different programme.

If a different programme or 6 minutes
after start another temperature is se-
lected the indicator light

Anti-crease/Finish

flashes. This does

not affect the programme sequence.
The indicator light goes out when the
programme selector is set back to the
programme or temperature previously
chosen.

To select a different programme pro-
ceed as follows:

With the I-ON/0-OFF button switch off
the appliance.

Turn the programme selector to

Fin-

ish

Switch the machine on with the
I-ON/0-OFF button.

Select a new programme.

Press the START button.

. . . Skipping a programme stage

Turn the programme selector to

Fin-

ish

As soon as the programme sequence
light for the stage at which the
programme should continue starts
flashing:

Turn the programme selector switch
to the appropriate programme within
4 seconds.

When programme locking has been
activated the programme cannot be
changed nor can a programme
stage be repeated or left out.

How to wash correctly

Summary of Contents for Novotronic Premier Novo

































































Search results

Summary of Contents for Novotronic Premier Novo

Reviews:

Related manuals for Novotronic Premier Novo

Brands by name

Popular brands

Miele Novotronic Premier Novo, Operating Instructions Manual

Search results

Summary of Contents for Novotronic Premier Novo

Reviews:

Related manuals for Novotronic Premier Novo

Brands by name

Popular brands