It is important to do this every time
the stainless steel surfaces are
cleaned, as the stainless steel
conditioner protects the surfaces
and helps prevent re-soiling.
Cleaning the condensate drain
hole
^
Remove the wooden shelves from the
wine conditioning zones.
^
Unscrew the runners at the right and
left.
^
Take off the cover caps and undo the
screws on the metal cover
a
.
^
Lift up the metal cover
b
and remove
it by pulling it forwards
c
.
^
Clean the drain hole using a cotton
bud.
^
After cleaning, refit the metal covers
and the runners and replace the
wooden shelves.
Cleaning the ice cube tray
The ice cubes are formed in a tray
before they are dropped down into the
drawer.
This tray should be cleaned regularly to
remove any stale ice or water.
^
Connect the appliance to the
electricity supply.
^
Open the top left drawer a little.
^
Press the On/Off button on the ice
cube maker. The indicator light will
come on.
^
Empty the ice cube drawer.
^
Press the On/Off button on the ice
cube maker and hold it pressed in for
approx. 10 seconds (after about a
second, the ice cube maker will
switch off and the indicator light will
go out).
The indicator light will flash.
^
Push the ice cube drawer in as far as
it will go within the next 60 seconds.
The ice cube tray will then rotate into an
angled position which makes it easier
for cleaning:
Cleaning and care
39
