– Leaving a finger on the sensor:
changes the temperature
continuously.
When the highest or lowest
temperature in the range is reached,
the
X
or
Y
sensor disappears.
Approx. 5 seconds after taking your
finger off a sensor, the
average,
current
temperature in the wine
conditioning zones or freezer section is
automatically shown.
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full
and
for
approx. 24 hours if the appliance is
full
before checking the temperature
display, as it will take this long for the
display to give an accurate reading. If,
after this time, the temperature is still
too high or too low, you will need to
adjust it again.
Temperature range
The temperature can be adjusted:
– In the wine conditioning zones from
5 °C to 20 °C
– In the freezer section from
-14 °C to -28 °C
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.
Temperature display
During normal operation the
temperature display on the control
panel shows the temperature in the
middle of the wine conditioning zones
or the temperature in the warmest part
of the freezer section.
Changing the temperature display
brightness
The temperature display brightness can
be adjusted to suit the lighting
conditions of the room.
^
Touch and leave your finger on the
X
sensor.
^
At the same time, briefly touch the
On/Off sensor (without letting go of
the
X
sensor).
^
Leave your finger on the
X
sensor for
another 5 seconds until
c
appears in
the display.
^
Touch the
X
sensor repeatedly until
d
appears in the display.
^
Touch the On/Off sensor.
^
The temperature display brightness
can now be changed by touching the
X
sensor:
d 0
: Maximum brightness
d 1
: Reduced brightness
d
–: Return to menu.
The correct temperature
21
