Miele KWTN 14826 SDE ed/cs-2 Operating And Installation Instructions Download

Page: 68 / 88

Remove covers

at the top.

Attaching the connecting plate will align
the appliances in height and depth. If
one of the appliances is higher than the
other, start with the higher appliance:

Loosely screw connecting plate

one of the appliances using two
screws

Push connecting plate

until the

central ridge of the plate touches the
side of the appliance.

Now tighten both screws

Secure connecting plate

to the

other appliance. To do this push the
appliances together or apart a little,
as necessary.

Remove the two covers

from the

bottom of the appliances.

Remove screw

, if present. This

screw is no longer required.

Installing in a side-by-side combination

Summary of Contents for KWTN 14826 SDE ed/cs-2

























































































Search results

Summary of Contents for KWTN 14826 SDE ed/cs-2

Reviews:

Related manuals for KWTN 14826 SDE ed/cs-2

Brands by name

Popular brands

Miele KWTN 14826 SDE ed/cs-2, Operating And Installation Instructions

Search results

Summary of Contents for KWTN 14826 SDE ed/cs-2

Reviews:

Related manuals for KWTN 14826 SDE ed/cs-2

Brands by name

Popular brands