Do not let water get into the
electronic unit or the lighting, or into
the ventilation gaps.
Cleaning water must not get into the
drain hole.
Do not use a steam cleaner to clean
the appliance. Steam could reach
electrical components and cause a
short circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service call.
The stainless steel doors have a
special finish which is resistant to
soiling.
Do not treat
the doors with stainless
steel conditioning agent as this will
cause noticeable smearing.
However, do use Miele stainless steel
conditioning agent to treat the other
stainless steel surfaces of the
appliance (available from Miele or
from www.miele-shop.com).
Unlike stainless steel cleaning
agents, the conditioning agent does
not contain any abrasive substances
and will gently remove soiling. Each
time it is used, it forms a water and
dirt repellent protective coating.
Cleaning agents
To avoid damaging the surfaces of your
appliance, do not use:
– cleaning agents containing soda,
ammonia, acids or chlorides,
– cleaning agents containing
descaling agents,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– solvent-based cleaning agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
– oven sprays,
– glass cleaning agents,
– hard, abrasive sponges and
brushes, e.g. pot scourers,
– melamine eraser blocks,
– sharp metal scrapers.
We recommend using lukewarm water
with a little washing-up liquid to clean
surfaces of the appliance.
The following pages contain
important information on cleaning.
Cleaning and care
45
