Miele KWFN 8706 SE ED-1 Operating And Installation Instructions Download

Page: 49 / 56

The appliance is supplied left hand
hinged. If right hand door hinging is
required, follow the instructions below.

Removing the door handles:

First the side section of the handle must
be removed:

Pull door handle

towards you. Side

section

slides back, creating a

gap

between side section

and

mounting plate

Place a suitable object (e.g. a spoon
handle) in gap

, and slowly lever

the handle towards the door.

Be careful not to let the "spoon
handle" slip, causing damage to the
appliance.

The side section

can now be

removed.

Pull side section

out of the guides

on the mounting plate.

Loosen the 4 screws (Torx 15) in the
mounting plate, and remove the
handle.

Remove the cover caps from the
opposite side, and fit them into the
empty holes.

Changing over the doors:

Open the lower door.

Use a screwdriver to lever plinth

out, then pull it forwards and out.

Use a screwdriver to remove cover

, then close the door.

Remove screw

completely.

Pull door support

together with

hinge pin

downwards, then tilt it

forwards and take it off.

Open the lower appliance door, move
it downwards and take it off.

With the upper door

closed, pull

hinge pin

downwards to remove it.

Open the upper door, and pull it
downwards and off.

Changing the door hinging

Summary of Contents for KWFN 8706 SE ED-1

























































Search results

Summary of Contents for KWFN 8706 SE ED-1

Reviews:

Related manuals for KWFN 8706 SE ED-1

Brands by name

Popular brands

Miele KWFN 8706 SE ED-1, Operating And Installation Instructions

Search results

Summary of Contents for KWFN 8706 SE ED-1

Reviews:

Related manuals for KWFN 8706 SE ED-1

Brands by name

Popular brands