The appliance can be installed in a
kitchen run. To match the height of the
rest of the kitchen, the appliance can
be fitted with a suitable top box
a
.
A ventilation gap of at least 50 mm
depth must be allowed for behind the
appliance for air to circulate.
The cross section of the air outlet under
the room ceiling must be at least
300 cm
2
to ensure that air can circulate
without hindrance. Otherwise the appli-
ance has to work too hard resulting in
an increase in electricity consumption.
The larger the cross section, the more
efficient the appliance.
The air inlet and outlet must not be
covered or blocked in any way.
They should be dusted on a regular
basis.
When
installed next to a wall
d
a dis-
tance of approx. 50 mm is needed on
the hinge side between the wall and the
appliance
b
, so that the doors and the
handles have sufficient space for open-
ing.
If necessary you can secure the refrig-
erator
b
to the adjoining furniture unit
c
using self tapping screws. The maxi-
mum depth you can screw into the re-
frigerator is 10 mm. Do not exceed this
amount.
Building in the appliance
34
Summary of Contents for KT 3538 Sed
Page 35: ...35 ...
