Miele KS3x422iD Operating And Installation Instructions Download

Page: 47 / 80

Interior lighting

Problem

Possible cause

Remedy

The LED lighting on
the fruit and
vegetable drawer
does not work.

To avoid overheating, the
lighting switches itself off
automatically after approx.
15 minutes if the door is left
open.

Close the appliance door.

When the door is reopened,
the interior lighting will work
again.

If this is not the case, then
there is a fault.

Call Miele.

The LED lighting may only
be repaired or changed by
a Miele authorised service
technician. Current-carrying
components are located
underneath the light cover.
Danger of injury and
damage!

The light cover must not
be removed. Should the
cover be damaged or
need to be removed due
to damage,

exercise

caution

. Never look at

the lighting with optical
instruments (magnifying
glass or similar).

Problem solving guide

Summary of Contents for KS3x422iD

















































































Search results

Summary of Contents for KS3x422iD

Reviews:

Related manuals for KS3x422iD

Brands by name

Popular brands

Miele KS3x422iD, Operating And Installation Instructions

Search results

Summary of Contents for KS3x422iD

Reviews:

Related manuals for KS3x422iD

Brands by name

Popular brands