manualshive.com logo in svg

Miele KS 37472 iD, Operating And Installation Instructions

The Miele KS 37472 iD is a high-quality kitchen appliance designed to provide users with optimal cooling and storage options. With its sleek design and advanced features, this fridge offers the perfect combination of functionality and style. Ensure you maximize its potential by downloading the Operating And Installation Instructions manual for free from manualshive.com.

Share
Download
background image

Building in the appliance

87

Open the appliance door.

Hang the cabinet door on the adjust-
ing bolts 

.

Screw the nuts 

 loosely onto the

adjusting bolts.

Close the door and check the dis-
tance between the door and adjacent
cabinet doors. The distance should
be the same.

Fitting the cabinet doors

An installation set or an extra pair of
securing brackets is available from
Miele Service or from specialist retail-
ers for the installation of large and di-
vided cabinet doors.

The distance between the appliance
door and the mounting frame is set to
5/16" (8 mm). Check this distance
and adjust it if necessary.

Push the installation aids 

 to the

height of the cabinet: the lower con-
tact edge X of the installation aids
must be at the same height as the
upper edge of the cabinet door to be
fitted (

 symbol).

Summary of Contents for KS 37472 iD

































































































Reviews:

No comments

Related manuals for KS 37472 iD

Danby D2000 Important Instructions preview
D2000
Brand: Danby Pages: 4
Samsung RF30HB Fast Track Troubleshooting preview
RF30HB
Brand: Samsung Pages: 8
Samsung RF267AB User Manual preview
RF267AB
Brand: Samsung Pages: 40
Samsung RF261BIAESR User Manual preview
RF261BIAESR
Brand: Samsung Pages: 84
Zanussi Electrolux Fridge-freezer Instruction Booklet preview
Fridge-freezer
Brand: Zanussi Electrolux Pages: 12
Samsung RF4287HABP User Manual preview
RF4287HABP
Brand: Samsung Pages: 39
U-Line Echelon CLRCO2175B40 Specifications preview
Echelon CLRCO2175B40
Brand: U-Line Pages: 2
Dometic CLASSIC RH423LDBI Installation And Operating Manual preview
CLASSIC RH423LDBI
Brand: Dometic Pages: 60
Gorenje NRK6191GHW Instructions For Use Manual preview
NRK6191GHW
Brand: Gorenje Pages: 40
Kaiser KS 80 Series User Manual preview
KS 80 Series
Brand: Kaiser Pages: 84
Uberhaus BC-46 Manual preview
BC-46
Brand: Uberhaus Pages: 24
Oypla 0039 User Manual preview
0039
Brand: Oypla Pages: 7
Kelvinator R-404A Installation Manual preview
R-404A
Brand: Kelvinator Pages: 80
Thermador T30IR901SP Use & Care Manual preview
T30IR901SP
Brand: Thermador Pages: 68
Oursson RF2405 Instruction Manual preview
RF2405
Brand: Oursson Pages: 28
Engel MT45F-S Specifications preview
MT45F-S
Brand: Engel Pages: 1
Electrolux E24RD75H Factory Parts Catalog preview
E24RD75H
Brand: Electrolux Pages: 9
Electrolux E24RD75KPS Specification Sheet preview
E24RD75KPS
Brand: Electrolux Pages: 4

Brands by name

Popular brands

Load more brands