Cleaning and care
48
Preparing the appliance for
cleaning
Switch the appliance off.
appears in the display and cooling is
switched off. If this is not the case, the
safety lock is on (see “Further settings -
Switching off the safety lock”).
Disconnect the appliance from the
mains. Switch off at the wall and
withdraw the plug from the socket, or
switch off the mains circuit breaker.
Take any food out of the appliance
and store it in a cool place.
Remove the door shelves and the
bottle shelves from the door.
Remove the drawers and the
compartment lid from the
PerfectFresh Pro zone (see “Adjusting
the interior fittings – Removing the
PerfectFresh Pro zone drawers”).
There is a pane of glass in the panel
which divides the refrigerator from the
PerfectFresh Pro zone. Remove this
glass plate.
Take out all other removable parts for
cleaning.
Dismantling the adjustable shelf/
adjustable shelf with lighting
Risk of damage due to incorrect
cleaning.
The stainless steel strip with LED
lighting will be damaged if you place
it in water for cleaning.
Clean the stainless steel strip with
LED lighting with a damp cloth.
Remove the stainless steel strips or
the stainless steel strip with LED
lighting before cleaning the adjustable
shelves in the dishwasher.
To remove the stainless steel strip and
the rear protective strip, proceed as
follows:
Place the adjustable shelf on a soft
surface (e.g. tea towel) with the top
side facing downwards.
Risk of damage due to incorrect
handling.
When you remove the stainless steel
strip with LED lighting, the contacts
(metal disc) can be damaged.
These contacts in the front left
corner supply power to the LED
lighting. Ensure that you always
loosen the side on which the
contacts are not located first.
Summary of Contents for KS 28463 D ed/cs
Page 86: ......
Page 88: ...M Nr 11 210 790 00 en AU NZ KS 28463 D ed cs ...
