Selecting further settings
35
Switching the keypad tone
/
on/off
Each time a selectable field in the
display is touched, a keypad tone
sounds. You can switch this tone on
or off
.
Setting the volume/Switching alarms
and audible tones
on/off
You can set the volume of the alarms
and audible tones in the segment bar:
If all segments are filled in, the
maximum volume is set.
If no segments are filled in, the alarms
and audible tones are switched off.
appears.
You will hear the volume change as it is
adjusted.
Alarms and audible tones for
temperature alarms, error messages,
interruptions to the power supply or a
set minute minder cannot be switched
off.
Setting the display brightness
You can set the display brightness in
the segment bar:
If all segments are filled in, the
maximum brightness is selected.
You will see the brightness change as it
is being adjusted.
Setting the temperature unit °C/°F
You can choose between degrees
Celsius
°C
and degrees Fahrenheit
°F
for the temperature display.
Switching Demo mode
off
Demo mode allows the refrigeration
appliance to be presented in a
showroom without the cooling system
being switched on. Do not activate
this setting for domestic use.
If Demo mode has been switched on at
the factory,
will show in the display.
You can switch the function off here.
If Demo mode has been switched off it
cannot be switched on again via
Settings mode
.
Summary of Contents for KS 28463 D ed/cs
Page 86: ......
Page 88: ...M Nr 11 210 790 00 en AU NZ KS 28463 D ed cs ...
