Safety features
40
System lock / Safety lock
The system lock and safety lock are
deactivated if there is a power out‐
age.
Three-finger control is the default set‐
ting. You can change the default to
one-finger control (see "Program‐
ming").
Your cooktop is equipped with a safety
lock to prevent the cooktop and the
cooking zones being turned on or any
settings being altered.
The
system lock
is activated when the
cooktop is turned off. When it is acti‐
vated, the cooktop cannot be turned on
and the timer cannot be used. The
cooktop is programmed so that the
system lock must be activated manual‐
ly. It can be programmed to be activat‐
ed automatically 5 minutes after the
cooktop has been turned off if the sys‐
tem lock is not manually activated first
(see "Programming").
The
safety lock
is activated when the
cooktop is turned on. When the safety
lock is activated, the cooktop can be
operated only under certain conditions:
– The power levels for the cooking
zones and the timer settings cannot
be changed.
– The cooking zones, entire cooktop,
and the timer can be turned off, but
once turned off cannot be turned on
again.
If a locked sensor switch is touched
when the safety lock or the system lock
is activated, the indicator light comes
on and
appears in the timer display
for a few seconds.
Activating
Tap the
and
sensor buttons of
both right cooking zones until
the
indicator light of the safety lock ap‐
pears in the timer display.
The indicator light and
go out after
a short while.
Deactivating
Tap the
and
sensor buttons of
both right cooking zones until
the
indicator light of the safety lock go
out in the timer display.
