Miele KM 6356 Operating And Installation Instructions Download Page 36

Page: 36 / 60

Safety features

System lock / Safety lock

The system lock and safety lock are

deactivated if there is an interruption

to the power supply.

Your hob is equipped with a system

lock and a safety lock to prevent the

hob and the cooking zones being

switched on or any settings being al‐

tered.
The

system lock

is set when the hob is

switched off. When the system lock ac‐

tivated, the hob cannot be switched on

and the timer cannot be used.
The

safety lock

is set when the hob is

switched on. When the safety lock is

activated,

– the cooking zone power levels and

the timer settings cannot be

changed.

– the cooking zones, the hob and the

timer can be switched off, but once

switched off cannot be switched on

again.

If an unavailable sensor is touched

whilst the system lock or safety lock is

activated



will appear in the timer dis‐

play for a few seconds and a tone will

sound.

Activating



Touch the



and



sensors until



appears in the timer display and a

tone sounds.



will go out after a short while..

Deactivating



Touch the



and



sensors at the

same time until



goes out in the

timer display.

Summary of Contents for KM 6356





























































Search results

Summary of Contents for KM 6356

Reviews:

Related manuals for KM 6356

Brands by name

Popular brands

Miele KM 6356, Operating And Installation Instructions

Search results

Summary of Contents for KM 6356

Reviews:

Related manuals for KM 6356

Brands by name

Popular brands